After starting the positioning software, select the Tag Set tab. The user can set the tag alias here. The height value of Tag Height is only used when the positioning software uses the TwoDim_TagHeightFixed positioning algorithm. This algorithm is used for scenes where the tag height is fixed. , Such as truck positioning
Alias and Height Settings
A. Click the Add a new anchor button to add Tag settings, the button functions are as follows
➤ Reload the list:Reload the tag setting list, load the tag list saved in the configuration file
➤ Add a new Ttg:Add tag settings.
Note that users cannot add settings without clicking
➤ Delete the selected list:Delete selected tag setting.
Note that the user must first click the tag device in the list
B. Fill in the field information of Modify the tag information on the right, the field description is as follows
➤ Tag Id:Tag ID
➤ Tag Name:Tag alias
➤ Tag Height:Tag height
This parameter is only used when the TwoDim_TagHeightFixed positioning algorithm is selected
C. After filling in, click the Update the data to the list button to save the settings, and the settings will be directly displayed on the graphics monitor
Tag Alias
As shown in the figure below, the Tag ID will be replaced by the Tag alias on the graphic monitoring, and the Tag ID list will also display the Tag alias and ID
Location Algorithm Selection
The positioning algorithm can be selected in the display settings in the setting window of the graphic monitoring