Use programming software to program Dongle firmware
Programming Steps
1、Continue to hold the button on Dongle and do not release, then connect to computer USB. After computer USB inserted, release the button
2、Then use Flash_Loader_Demonstrator for programming. Refer to the programming step instructions of the previous programming software
3、No need to continue to press the button after programming completed, directly reconnect to PC. Red light at lower left flashing indicates that it is working normally
4、After the UWB dongle works normally, the user can use the configuration software to configure the device.
Use update software to update UWB Dongle firmware
1、Insert UWB Dongle to USB port of computer and open RfUpdateApp.exe
2、Select corresponding serial port to UWB Dongle and click Connect
3、Select firmware and related firmware information will appear below, confirm and select “Start update” button to begin update, see image
4、Because the UWB Dongle firmware is updated directly, users only need to wait for the Progress bar to reach 100%
5、Click “Read Status” button to read current status of UWB Dongle, UWB Dongle status shown below in the image