10.1 inch HMI Smart Terminal ｜ HMI6Q/D-CT101H
Cortex A9 iMX6Q/D
Model: HMI6Q/6D-CT101H
HMI6Q/D 10.1" LCD Series:
|
Item |
Size/Ratio |
Brightness |
Resolution |
Interface |
OS |
| 6Q/6D-AN-CT101H | 10.1"/ 16:9 | 350 | 1280X800 | CT | Android SDK |
| 6Q/6D-LX-CT101H | 10.1"/ 16:9 | 350 | 1280X800 | CT | Linux+QT |
CT Standard HMI:RS232*3，RS485*1+GPIO*16+USB HOST+TF+USB OTG+HDMI
+RJ45+WiFi(2.4G/5.8G)+BT+AUDIO+GSensor+4G Module (Optional)
 |
|
HMI Functions |
| HMI Interface | 7.0" mainboard：With a 7.0/10.1 inch LCD driver board |
| LCD+Drive board |
| HMI Classifications |
| Appearance Display |
To allow our customers to easier connect our devices with their own device, we provide several appearance options for our HMI intelligent terminal
♦ If there is need to embed HMI to user’s device, then HMI does not need a back cover, we adopt the open frame
method which could be directly embedded into devices. Outer frame position of T, I, S as referred under specification classification can be selected for HMI
(T:HMI68XX-CT070H-C1-X-T；I:HMI68XX-CT070H-C1-X-I；S:HMI68XX-CT070H-C3-X-S)
♦ Independent HMI is covered with aluminum case, outer frame position SC under specification classification can be selected for HMI
♦ 360 degrees rotation view: Left click mouse to move image left and right to view product in 360 degrees.
1.HMI6QAN-CT101H-C1-7-T appearance as below：
(T means TP is above the view screen, I means aluminum frame is above the view screen)
2.HMI6QAN-CT101H-C3-7-SC appearance as below：
(SC is display screen with aluminum frame, mainboard has back cover; S is display screen with aluminum frame, mainboard doesn’t have back cover)
Hardware Specification
| Item | Description |
| Standard | Cortex-A9 Freescale iMX6Q/6D ，4/2 core / 0.8~1.0GHz Support 1G/2G DDR3 memory. Standard: 1GB Support 4/8/16/32GB iNand Flash. Standard: 8GB eMMC Support 2D / 3D image acceleration engine |
| Display |
Support 5.0 inches of RGB LCD with 16 : 9, resolution is 800*480 (Brightness is 400Lum) |
| TP | Capacitive touch, P+G structure, surface hardness is 2H；G+G structure, surface hardness is 6H(optional) |
| Serial port | Standard: RS232*3/RS485*1 with 15KVantistatic protection)，another options are RS232*4，RS232*2/RS485*2，TTL(5V or 3.3V)RS232*4 |
| Ethernet | 1 built-in 1000M Ethernet to achieve remote data transmission andremote table control |
| WIFI +BT | Embedded dual-band 2.4G/5.8G WIFI+BT4.0 Bluetooth module |
| USB | USB HOST 2.0 for systemupdate as well as externally connectto mouse, USB flash drive and the devicewith USB interface. |
| TF | Support TF SD card (4G~64G) |
| 4G | Adapt FDD-LTE/TDD-LTE/TD-SCDMA/EDGE/GPRS/GSMwireless terminals with multiple network systems (optional) |
| NB-IoT | Support(optional) |
| Audio | Support audio poweramplifier that connects to speaker as well as support recording, playing andbuilt -in buzzer and microphone. （optional） |
| Other | HDMI *1 GSensor*1 16 sets of IO input/output, It is default with 8 input and 8 output. The 8 input were PMW*1（PIN*1)，SPI*1（PIN*4)，ADC*1（PIN*1)，IIC*1（PIN*2) (optional) Independent external RTC clock, built-in large battery capacity, life of about 10 years |
| Power & work nvironment | 6V-30V wide-rangevoltage supply, working temperature: -10℃~ 70℃ , working humidity：45%-80% RH |
| Dimension | Main control board：165.0mm x 100.0mm (for 7.0" & 10.1") 123.6mm x 81.8mm (for 4.3" & 5.0" ) 10.1" LCD drive board：254.8mm x 169.0mm 7.0" LCD drive board：185.0mm x 110.0mm 5.0" LCD drive board：136.8mm x 87.8mm 4.3" LCD drive board：123.5mm x 82.0mm |
Software Specification
| Item | Descriptions | ||
| System | Android | QT | Ubuntu |
| Version | 5.1.1Lollipop | 5.4.0 | 12.04/14.04 |
| Kernel Version Linux 3.4.39 |
✓ | ✓ | |
| Uboot Version U-boot2014.07 |
✓ | ✓ | |
| Cross compiling tool arm-eabi-4.8 |
✓ | ✓ | |
| File format Ext4 |
✓ | ✓ | |
| 4G internet phone Support full Netcom(optional) |
✓ | ||
| WIFI Support 2.4G and 5.8G dual-band |
✓ | ✓ | |
| Bluetooth Support 2.0 SPP and 4.0 BLE main mode function |
✓ | ||
| NB-IoT Support NB-IoT datatransmission and receiving |
|||
| Acceleration induced bygravity Support gravity sensing and screen rotation |
✓ | ✓ | |
| Ethernet Gigabyte Ethernet |
✓ | ✓ | |
| HDMI HDMI，1920*1080P 60HZ |
✓ | ✓ | |
| Audio Support sound playing andrecording |
✓ | ✓ | |
| Touch control Support capacitive multi-touch control. 5 points touch controls are set. Maximumtouch control can reach up to 10 points. |
✓ | ✓ | |
| USB HOST Support mouse, keyboard andUSB drive in HID device. |
✓ | ✓ | |
| OTG Support ADB debug, MTPreview and FT232 USB turning serial port |
✓ | ✓ | |
| ADC Support ADC12- bitprecisiondata collection |
✓ | ✓ | |
| Serial port Support 4 selections ofRS232 and RS485. 3/1,4/0,2/2. The front one is RS232. |
✓ | ✓ | |
| G3D drive Support 3Dspeed up |
✓ | ✓ | |
| Buzzer Support 1buzzer |
✓ | ✓ | |
| RTC battery Support design of time withwriting/reading reservation |
✓ | ✓ | |
| USB Camera Support preview, photo and video recording (optional) |
✓ | ✓ | |
| GPIO input/output Support 16 sets of GPIO input/output PWM*1(PIN*1) / SPI*1(PIN*4) / ADC*1(PIN*1) / IIC*1(PIN*2) |
✓ | ✓ | |
| PWM Support 1 hardware PWMoutput |
✓ | ✓ | |
| SPI Support 1 hardware SPI datawriting/ reading |
✓ | ✓ | |
| IIC Support 1 hardware IIC datawriting/reading |
✓ | ✓ | |
| Boot Logo Support boot LOGOc ustomization |
✓ | ✓ | |
| APK installation Support silent installationand normal installation |
✓ | ||
| Reboot Support settings for rebootprocess. The user can design his own reboot process. |
✓ | ✓ | |
|
SDK development kit |
✓ | ✓ | |
|
|
|||
|
Notice: 1. The RS485 function of the HMI only provides the RS485 communication protocol for interface communication on the 2. The HMI of DMATEK provides google play services, developers can develop applications using the google API and execute at the HMI of the DMATEK. |
|||
Power consumption test report
Power consumption test report: Click here
Basic Accessory
*. For your very first purchase of an HMI smart terminal (only for the first time), one optional RS232 TO D-TYPE Cable and one
USB TO D-TYPE Cable will be given as a gift, which is convenient for connecting to the USB interface of the computer.
|
HMI-6Q/D Host |
2Pin DC Head Power Line |
PCB Antenna (2.4G) X2 |
6Pin RS232/485 Adapter X2 |
Optional Accessory
Selection suggestions:
1. If you use HMI to develop Linux+QT, it is recommended to purchase a female-to-female extension cable and USB-RS232 adapter to facilitate the use of the USB interface of the computer.
2. The expansion test board provides test programs for each interface of the HMI to facilitate the verification and testing of software and hardware.
|
12V 5A Power Line |
Micro USB Data transmission line |
Extended test board |
USB to RS485 adapter |
2Pin Speaker |
|
USB to D-Type Cable |
RS232 to D-Type Cable |
Cross Cable |
USB Dongle |
4G Module |
|
GPSModule |
USB Camera |
