UWB Waterproof Bangle Type TAG ｜ UTAG-H03
TAG
Model: UTAG-H03
Overview:
UWB tag adopts UWB wireless two-way high-frequency communication. Its design is made to meet different environmental conditions. The technology and application enable to detect unexpected incidents and to monitor the real-time location of mobile objects. The firmware and hardware can be customized for customer's requirements.
Applied area :
Locate staff, visitors and mobile equipment for safety and security
♦ Standard version serial number is UTAG-H03
UTAG-H03 Waterproof Bangle Type TAG
| Item | Specifications |
| UWB Transceiver | Decawave DW1000 |
| Protocal & Frequency | 802.15.4a UWB 3.25GHz~6.75GHz |
| Coverage | Max 50M line-of-sight ( 30M recommended ) |
| Special function | It has the function of waterproof, tamper proof and heart rate detection |
| Button & charging voltage | power on/off ，alarm button，customized button ; DC + 5V input |
| LED display | power, communication status, power capacity and customization |
| Peripheral Device |
Gsensor (Standard)；Vibration Motor，Heart rate detection |
| Power capacity | lithium battery 800mAh / 6 odd months ( 2 seconds at a time under UWB Smart IPS project). (Exact standby hours may vary due to different assigned task.) |
| Dimension & Weights | body 41×35×14(mm) / 185g |
| Protection level | IP65 |
| Model No | UTAG-H03 |
| Applied area | personal positioning and located alarm |
Insant Location Status
Power Consumption
|
TAG Smart IPS power information analyzes customer’s usage to provide
Introduction to Image on the Right: Static: Transmission frequency between Tag and anchor while it is static Motion: Transmission frequency between Tag and anchor while it is mobile Power consumption: Moving time, calculating 8 hours/day
|
|
Product Function
|
Glass panel: Does not contain any display function Switch/set key: Power on/off, setting mode SOS key: Alarm report function LED1: Signal transmission and setting mode indicator LED2: Charging indicator (red means charging, green means full charge) |
|
UWB Tag Types
UWB Tags Feature Matrix
| Power | Features | Sensors | |||||||||
| Tag Name | Battery | Extenal power |
Wireless Charging |
Button | LED | Type | NFC (optional) |
Water- proof |
Anti- dismantle & Heart rate detection |
Acc | Baro-meter |
| UTAG-5136 | Li 500mAh | ✔ | ✖ | ✔ | ✔ | Helemet | ✔ | ✖ | ✖ | ✔ | ✔ |
| UTAG-7351 | Li 500mAh | ✔ | ✖ | ✔ | ✔ | ✔ | ✖ | ✖ | ✔ | ✔ | |
| UTAG-7045 | Li 1000mAh | ✔ | ✖ | ✔ | Material | ✖ | ✖ | ✔ | ✔ | ||
| UTAG-8141 | Li 1000mAh | ✔ | ✖ | ✔ | ✔ | Material | ✖ | ✖ | ✔ | ✖ | |
| UTAG-8358 | Li 1000mAh | ✖ | ✔ | ✔ | Material | ✔ IP65 | ✖ | ✔ | ✖ | ||
| UTAG-9056 | Li 400mAh | ✔ | ✖ | ✔ | ✔ | Card | ✔ | ✖ | ✖ | ✔ | ✔ |
| UTAG-9060 | Li 1000mAh | ✖ | ✔ | ✔ | Card | ✔ | ✔ IP65 | ✖ | ✔ | ✖ | |
| UTAG-H03 | Li 800mAh | ✔ | ✖ | ✔ | ✔ | Watch | ✔ IP65 | ✔ | ✔ | ✖ | |
| UTAG-H04 | Li 500mAh | ✔ | ✖ | ✔ | ✔ | Watch | ✔ | ✖ | ✖ | ✔ | ✖ |
UWB Tag Spec.
| Name | Battery | Power | Output power spectral density -30dBm/Mhz |
Output power spectral density(PA) -21dBm/Mhz |
Minimum power 0.185mW |
Maximum power 0.6W |
| UTAG-5136 | Li 500mAh | Li Battery | ✔ | ✔ | ✔ | ✔ |
| UTAG-7351 | Li 500mAh | Li Battery | ✔ | ✔ | ✔ | |
| UTAG-7045 | Li 1000mAh | Li Battery | ✔ | ✔ | ✔ | |
| UTAG-8141 | Li 1000mAh | Li Battery | ✔ | ✔ | ✔ | |
| UTAG-8358 | Li 1000mAh | Li Battery | ✔ | ✔ | ✔ | |
| UTAG-9056 | Li 400mAh | Li Battery | ✔ | ✔ | ✔ | ✔ |
| UTAG-9060 | Li 1000mAh | Li Battery | ✔ | ✔ | ✔ | |
| UTAG-H03 | Li 800mAh | Li Battery | ✔ | ✔ | ✔ | |
| UTAG-H04 | Li 500mAh | Li Battery | ✔ | ✔ | ✔ | |
| UTAG-SL90F-M | Li 1800mAh | Li Battery | ✔ | ✔ | ||
| Specifications |
UTAG-H03 Waterproof Bangle Type TAG
1. Protocol & Frequency : 802.15.4a UWB 3.25GHz~6.75GHz
2. Coverage : Maximum 100m line-of-sight (30 to 50 meters recommend)
3. Parameter Setting : Transmission time 0~65636 seconds, ID setting, G-sensor sensitivity setting
4. Button & Charging Voltage : Power button；DC +5V input
5. LED Display : power, communication status, power capacity and customization
6. Peripheral Device : Gsensor (Standard)；Vibration Motor，Heart rate detection
7. Power Supply : Lithium battery 800mAh / 6 months (2 seconds at a time under SmartIPS project)
8. Dimention & Weights : body 41×35×14(mm) / 185g
9. Protection level : IP65
10.Model No : UTAG-H03
Description:
| Item | Description | Remarks |
| Standard | IEEE802.15.4-2011 | |
| Frequency band |
3.5GHz-6.5GHz |
Default use 4GHz |
| Channel frequency width | 500MHz | |
| Rate | 110Kbps/850Kbps/6.8Mbps | Default use 6.8Mbps |
| Output power | Max -30dBm/MHz (see figure 1 & 2) |
0dB-30.5dB Software editable |
| Modulation mode | BPM with BPSK | |
| FDMA | 4 channels | |
| CDMA | 2 different code / channel | |
| Working Mode | Time of flight (TOF) | |
| Coverage | UP to 60M(Max) outdoor With PA Can to 200M(Max) in line of sight |
The figure below shows the power spectral density of UWB CH2 and CH3
figure 1: Tx Spectrum Channel 2
figure 2: Tx Spectrum Channel 3