7 inch HMI Smart Terminal ｜ HMI21-CT070H
Cortex A8 210
Model: HMI21-CT070H
HMI21 7.0" LCD Series:
|
Item |
Size/Ratio |
Brightness |
Resolution |
Interface |
OS |
| 21CE-CT070H | 7.0" / 16:9 | 400 | 1024X600 | CT | WinCE |
CT Standard HMI: RS232*3，RS485*1+GPIO*13+USB HOST+TF+USB OTG+HDMI
+RJ45+WiFi(2.4G)
|
HMI Functions |
|
HMI Interface |
4.3" mainboard：With a 4.3/5.0/7.0/10.1 inch LCD driver board |
|
LCD+Drive board |
|
HMI Classifications |
Hardware Specification
| Item | Descriptions |
| System | Cortex A8 1.0GHz Support 512M/1G/2G DDR3 memory. Standard: 512GB Support 2/4/8/16/32GB Nand Flash. Standard: 2Gb Nand flash Support 2D / 3D image acceleration engine |
| Display | Support 4.3 inches of RGB LCD with 16 : 9, resolution is 480*272(Brightness is 350Lum) Support 5.0 inches of RGB LCD with 16 : 9, resolution is 800*480(Brightness is 400Lum) Support 7.0 inches of LVDS LCD with 16 : 9, resolution is 1024*600(Brightnessis 400Lum) Support 10.1 inches of LVDS LCD with 16 : 9, resolution is 1280*800(Brightness: 350Lum) |
| TP |
Capacitive touch, P+Gstructure, surface hardness is 2H/6H |
| Serial port |
Standard: RS232*3/RS485*1 with 15KVantistatic protection). another options are RS232*4(optional), RS232*2/RS485*2(optional), TTL(5V/3.3V) RS232*4(optional) |
| Ethernet | 1 built-in 100M Ethernet to achieve remote data transmission andremote table control |
| WIFI |
Embedded 2.4G wifi module |
| USB |
UUSB HOST 2.0 for systemupdate as well as externally connectto mouse, USB flash drive and the devicewith USB interface |
| TF | Support TF SD card (4G~64G) |
| HDMI |
1 pcs |
| Other |
13 sets of IO input/output, they can also be set to EINT*6 (PIN*6) / PWM*1 |
| Power | 6V-30V wide-rangevoltage supply, working temperature: -10℃~ 75℃ , working humidity：45%-80%RH |
| Dimension |
Main control board：123.6mm x 81.8mm (for 4.3",5.0",7.0",10.1 LCD) 10.1" LCD drive board：254.8mm x 169.0mm |
Software Specification
| Item | Descriptions |
| System | WinCE |
| Version | 6.0 |
| WIFI Support 2.4G WIFI |
✓ |
| Bluetooth Support 2.0 SPP and 4.0 BLE main mode function |
✓ |
| Ethernet 100M Ethernet |
✓ |
| Buzzer Support 1 buzzer |
✓ |
| Touch control Support capacitive multi-touch control |
✓ |
| USB HOST Support mouse, keyboard andUSB drive in HID device |
✓ |
| OTG Support for Windows synchronization |
✓ |
|
Serial port |
✓ |
| ADC Modulus conversion Support 0~3.3V collection |
✓ |
| RTC battery Support design of time withwriting /reading reservation |
✓ |
| HDMI Support DHMI，1280*720P 60HZ |
✓ |
| GSensor Gravity sensing, screen rotation |
✓ |
| GPIO 13 sets of IO input/output, they can also be set to EINT*6 (PIN*6) / PWM*1(PIN*1) / SPI*1(PIN*4) / IIC*1(PIN*2) |
✓ |
| PWM Support 1 hardware PWM output |
✓ |
| SPI Support 1 hardware SPI datawriting/ reading |
✓ |
| IIC Support 1 hardware IIC datawriting/ reading |
✓ |
| Boot LOGO Support boot LOGOc ustomization |
✓ |
| Reboot Support settings for rebootprocess. The user can design his own reboot process |
✓ |
| SDK development kit Functions mentioned abovecome with holistic SDK development kit, manual and demo video |
✓ |
|
Notice: 1. The RS485 function of the HMI only provides the RS485 communication protocol for interface communication on the hardware level. The HMI converts the packet data sent by the UART into RS485 potential signal through the RS485 conversion module, and then communicates with the RS485 device. |
|