Industrial IoT Router

     The 4G wireless Router series is an IoT wireless communication router with 4G single card or 4G dual card. It supports the international standard FDD-LTE, TDD-LTE, and TD-Scdma 4G mobile broadband network standards, providing users with convenience and speed. high-speed network transmission function.

      This series of products uses a high-performance 32-bit professional network communication processor and an embedded real-time operating system as the software support platform to provide users with a safe, high-speed, stable and reliable 4G wireless routing network. Wireless router that provides 2/4/5 Ethernet RJ45 interfaces, 1 communication serial port, 485/232 and WiFi interfaces.

       This series of products can be widely used in finance, postal services, smart grids, charging piles, self-service equipment, smart transportation, environmental monitoring, fire monitoring, security monitoring, water conservancy monitoring, public safety, advertising, industrial control, earthquake monitoring, meteorological monitoring, Instrument monitoring and other industries.

Industrial-grade Design

*  High performance industrial-grade wireless communication module

*  High performance industrial grade 32 bit MIPS processor

*  Low power consumption and low heat generation

*  Supports multiple modes including sleep mode, scheduled online
   and offline mode and scheduled power on and off mode

*  Adopt sheet metal cold-rolled steel shell

*  Wide power input range:7.5V~32V DC

 Stability&Reliability

*  Adopt software and hardware watchdog and multi-level link detection mechanism,
   with automatic fault detection and automatic recovery capabilities to ensure stable
   and reliable operation of the equipment

*  Multiple device self-checking mechanisms to ensure smooth links and alarms

*  Built in 1.5KV electromagnetic isolation protection for Ethernet interface

*  Equipped with wireless signal indicator light to display on-site signal strength in three levels

Network

*  Gigabit network interface, port traffic detection

*  Real-time link monitoring

*  Support VPN client: PPTP, L2TP, IPSec, OPENVPN, N2N, GRE

*  Serial port offer Data Transfer Unit(DTU) function

*  Support Dial-on-demand (voice, SMS or data trigger)

*  Support QOS, UPnP protocol, Port forwarding, UDP broadcast relay

Remote management

*  Remote online mornitoring

*  Remote parameter backup

*  Parameter configuration

*  Equipment upgrade or reboot

*  Log query, parameter backup

Functional features

*  Support 4G LTE network, backward compatible with 3G and 2G

*  Support network monitoring and backup function

*  Support 1 X WAN + 4 X LAN

*  Provides standard RS-232/485 serial port and supports serial port DTU
   (data transmission terminal) function

*  WIFI Support 802.11b/g/n/. Support AP/Client/Routing/Repeat Mode

*  Support wired network and wireless network load balancing

*  Supports hardware WDT and provides an anti-dropout mechanism to
    ensure that the data terminal is always online

*  Supports VPDN private network card and multiple VPN protocols such
    as PPTP, L2TP, IPSEC, OPENVPN, and GRE

*  Support SNMP, ICMP, TCP/IP, UDP, Telnet, SSH, FTP, HTTP, HTTPS network protocol

*  Support WI-FI forced advertising push function

*  Support DHCP, DDNS, Firewall, NAT, and DMZ host

*  Supports standard industrial-grade drawer SIM/UIM card design

Communications Support

Router type description:

In response to the different needs of customers, we have planned 2 series of products based on the number of 4G modules supported, the number of physical networks and SIM cards, WIFI, RS232, appearance, etc., as shown in the table below.

Among them, the following router models used in Taiwan are described:

*  2R10S-4G-X  supports: physical network x2, single 4G module, single SIM card, WIFI, RS232, RS485 (optional), desktop type

*  2R10S-4G-GG supports: physical network x2, GPS, single 4G module, single SIM card, WIFI, RS232, RS485 (optional), wall-mounted type

 → IoT Wireless Router Series Specifications List：Click here to download

			2R10S-C1	2R10S-4G-X	2R10S-4G-GG
Specification	WiFi	Protocal	IEEE802.11b/g/n	IEEE802.11b/g/n	IEEE802.11b/g/n
		Frequency	2.4Ghz,Speed up to 150Mhz	2.4Ghz,Speed up to 150Mhz	2.4Ghz,Speed up to 150Mhz
	Ethernet Port (RJ45)	10/100Mbps WAN / LAN	x1 WAN / x1 LAN	x1 WAN / x1 LAN	x1 WAN / x1 LAN
	Serial Port	RS232/485(DTU)	●	●	●
	Sim Card Slot		x1  (Nano card)	x1  (Nano card)	x1  (Mini card)
	Other functions	Support VPN ptotocol	●	●	●
		Support DHCP,DDNS,firewall,NAT,DMZ	●	●	●
		Support strong WDT, self-recovery, schedule reboot function, keeping always online			●
	Antenna	4G Antenna(SMA)	1x3dBi	1x3dBi	1x3dBi
		WiFi Atenna	1x3dBi	1x3dBi	1x3dBi
		GPS Atenna			1x3dBi
	Installation Method		Din-roll mounting	Din-roll mounting
	GPS function				●
X Series	Applicable Countries	Fruquency Band
Default	Australia/New Zealand/Taiwan	FDD:B1/3/5/7/8/28 TDD:B40 WCDMA:B1/5/8 GSM:850/900/1800/1900		●
A Series	North America	1.FDD:B2/4/5/12/13/17/ B18/B25/26 TDD:B41 WCDMA:B2/4/5 EVDO:BC0/1 GSM:850/1900 2.LTE FDD: B2/B4/B5/B12/ B13/B14/B66/B71 WCDMA: B2/B4/B5		●
E Series	Europe/Middle Asia/Africa/Korea/ Thailand/India	LTE FDD: B1/B3/B7/B8/B20/B28A LTE TDD: B38/B40/B41 WCDMA:B1/B8 GSM: B3/B8		●
G Series	Globlal	LTE-TDD: B34/B38/B39/B40/B41 LTEFDD:B1/B2/B3/B4/B5/B7 /B8/B12/B13/B18/B19/B20 /B25/B26/B28/B66 UMTS/HSPA+:B1/B2/B4/B5/ B6/B8/B19 GSM/GPRS/EDGE:850/900/ 1800/1900MHz		●
V Series	Latin America	FDD:B2/4/5/7/8/28 TDD:B40 WCDMA:B2/5/8 GSM:850/900/1800/1900		●
GG Series	Globlal	LTE-TDD: B34/B38/B39/B40/B41 LTEFDD:B1/B2/B3/B4/B5/B7 /B8/B12/B13/B18/B19/B20 /B25/B26/B28/B66 UMTS/HSPA+:B1/B2/B4/B5/ B6/B8/B19 GSM/GPRS/EDGE:850/900/ 1800/1900MHz			●

Note:  ● means supported; ○ means expandable; -- Empty means not supported.