➤ Reply to Tag's broadcast packet so that Tag can calculate the distance
➤ Forward Tag Positioning Packet
➤ Regularly report packets containing its own ID
➤ The device can use WIFI or LAN to connect to the Internet and support POE power supply
Industrial Type
PWR:Power indicator
LED1:RF signal indictor. LED 1 light up after the internet is connected. The LED1 Flashes while the RF is transmitting
LED2:Network signal indicator. LED2 light up after the internet is connected. Led 2 flashes while the network signal is transmitting
※ When LED1、LED2 both flashes, it indicates that ID is illegal. Values are often shown as 0x0000 or 0xffff
UART:Firmware burning interface (Micro USB)
KEY:Non-functional for now
WIFI、UWB:WIFI antenna、UWB antenna
DC:DC 5V power input
LAN:RJ45 network interface/ PoE (standard power supply)
UART/IO:Serial cable and 2 x IO pins
In the active positioning system, the positioning information is output through TX2 in the UART/IO port. The signal is TTL level. If the user wants to receive packets on the PC, an external TTL-USB or TTL-232 conversion device is required.
Tag GND <——> Conversion Device - GND
Tag TX2 <——> Conversion Device - RX
※ When LED1 flashes per 0.5 s, it indicates that ID is illegal. Values are often shown as 0x0000 or 0xffff
Ceiling-mounted type
Button:Setting Button
Interface:RJ45 network connection
External Power Supply:DC 5V power input, POE
※ When LED flashes per 0.5 s, it indicates that ID is illegal. Values are often shown as 0x0000 or 0xffff
Waterproof type
RJ45 Interface:Connects to RJ45
Power Connector: Power supply input jack
Multi-functional button:Signal indication light/On, Off
※ When LED button flashes per 0.5 s, it indicates that ID is illegal. Values are often shown as 0x0000 or 0xffff